Details Matter…
Our sodium thiosulfate solutions are prepared from ACS Grade, micro-crystalline Na2S2O3. In order to maximize shelf life, our matrix is prepared using double-deionized, ASTM Type 1 Water.
Our iodine solutions are prepared from ACS Grade potassium iodide and crystalline elemental iodine. To guarantee a clean and stable product, our matrix is prepared using double-deionized, ASTM Type I Water.
All solutions are prepared gravimetrically, using high accuracy analytical balances, to ensure precise target concentrations. Each batch is thoroughly homogenized using a high speed industrial mixer to ensure reliable results from the first bottle to the last.
We are titrating our samples on our automated titrator. The automated dosing drive uses 10,000 steps over it 20 mL volume, so its dosing increment can be as small as 2 μL. For these applications, we are using a minimum dose of 10 μL for the sodium thiosulfate endpoint and 4 μL for the iodine endpoint. These settings achieve the extremely precise measurements for each titration while also staying within the parameters of the dosing unit.
As stated on our Certificate of Analysis, the sodium thiosulfate is run against a 0.1 N potassium dichromate solution. The exact normality of this solution is calculated by comparing it to NIST potassium dichromate. A set of 6 samples are run that must all be within the nominal value of 0.0394 N ± 0.00008 N.
Then the certified sodium thiosulfate is used to titrate iodine. A set of 3 samples are run that must all be within the nominal value of 0.0473 N ± 0.00003 N.
Before releasing either of these reagents for packaging, we run QC checks with a previous lot to ensure accuracy over time.
Click here for product listing or to request a FREE sample
SPEX CertiPrep 